CEDAR思達電批扭力測試儀
一、測試范圍：
0.001~1N.m
0.01~10kgf.cm
0.01~9Lbf.in
二、技術參數：
誤差：±0.5%
功能：LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零
外型尺寸：155(W)×125(D)×55(H)
配件：連接頭SJ10/包裝盒/AC充電器各一個
測量方法：可通過批嘴頭或六角頭進行測量。
產地：日本
CD-100CEDAR思達電批扭力測試儀
| 日本思達牌電批扭力測試儀 | ||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||
CD-10CEDAR思達電批扭力測試儀
| 日本思達牌電批扭力測試儀 | ||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||
CD-10、CD-100思達電批扭力測試儀
日本思達牌電批扭力測試儀 型號 DI-9-08 DI-9-08 CD-10 CD-100 測試范圍 0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in 0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in 0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in 0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in 誤差 ±0.5% ±0.5% 功能 LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零 外型尺寸 155W×125D×55H 配件 測量頭OW025/OW10包 裝盒/AC充電器各一個 測量頭OW020/OW60包 裝盒/AC充電器各一個 連接頭SJ10/包裝 盒/AC充電器各一個 連接頭SJ50包裝盒 /AC充電器各一個
規格 CD-100 CD-10 測試范圍 3.0-800.0 mNm 0.030-8.000 N叮 精度 8000-500 digit 0.5% 499-30 digit within3digit 顯示單位 lbfin-kgfcm-Nm 歸零 Return to zero by pressing clear button. Data spec. Data output Based on RS232C Baud rate:9600 Power supply Auto power off 自動電源關閉 10 min. Battery drive Ni-Cd 1.2V 5cells1200mAh 充電時間 8hrs. 連續充電時間 20hrs. 自動歸零 配備自動歸零裝置 尺寸 W:155D:125H:30 / 1kg 附件 Measuring joint SJ10/50 Measuring joint SJ10
DI-IM-IP500日本思達電批扭力測試儀
| Management of air tool / oil pulse tool |
| 仠Torque Tester 丂DI-1M-IP丂series |
 |
| Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range (at the time of Track) | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯(499 or less digit亇3digit) | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity (baud rate 9600) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
| Accessories (one piece each) | Attache case | 乗 | 乗 | |
| AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | 俬俹俆侽 | 俬俹俀侽侽 | 俬俹俆侽侽 |  |
| 俙 | 兂50 | 兂60 | 兂80 | |
| 俛 | 63 | 73 | 99 | |
| 俠 | 10 | 10 | 15.5 | |
| 俢 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| Weight | 632g | 1.8kg | 3kg | |
CD-10、CD-100日本思達電批扭力測試儀
日本思達牌電批扭力測試儀 型號 DI-9-08 DI-9-08 CD-10 CD-100 測試范圍 0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in 0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in 0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in 0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in 誤差 ±0.5% ±0.5% 功能 LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零 外型尺寸 155W×125D×55H 配件 測量頭OW025/OW10包裝盒/AC充電器各一個 測量頭OW020/OW60包裝盒/AC充電器各一個 連接頭SJ10/包裝盒/AC充電器各一個 連接頭SJ50包裝盒/AC充電器各一個 規格 CD-100 CD-10 測試范圍 3.0-800.0 mNm 0.030-8.000 N叮 精度 8000-500 digit 0.5% 499-30 digit within3digit 顯示單位 lbfin-kgfcm-Nm 歸零 Return to zero by pressing clear button. Data spec. Data output Based on RS232C Baud rate:9600 Power supply Auto power off 自動電源關閉 10 min. Battery drive Ni-Cd 1.2V 5cells1200mAh 充電時間 8hrs. 連續充電時間 20hrs. 自動歸零 配備自動歸零裝置 尺寸 W:155D:125H:30 / 1kg 附件 Measuring jointSJ10/50 Measuring jointSJ10
CD-100M日本思達電批扭力測試儀
| ||||||||||||||||||||||||||||||||
CD-10、CD-100日本思達電批扭力測試儀
日本思達牌電批扭力測試儀 型號 DI-9-08 DI-9-08 CD-10 CD-100 測試范圍 0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in 0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in 0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in 0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in 誤差 ±0.5% ±0.5% 功能 LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零 外型尺寸 155W×125D×55H 配件 測量頭OW025/OW10包裝盒/AC充電器各一個 測量頭OW020/OW60包裝盒/AC充電器各一個 連接頭SJ10/包裝盒/AC充電器各一個 連接頭SJ50包裝盒/AC充電器各一個 規格 CD-100 CD-10 測試范圍 3.0-800.0 mNm 0.030-8.000 N叮 精度 8000-500 digit 0.5% 499-30 digit within3digit 顯示單位 lbfin-kgfcm-Nm 歸零 Return to zero by pressing clear button. Data spec. Data output Based on RS232C Baud rate:9600 Power supply Auto power off 自動電源關閉 10 min. Battery drive Ni-Cd 1.2V 5cells1200mAh 充電時間 8hrs. 連續充電時間 20hrs. 自動歸零 配備自動歸零裝置 尺寸 W:155D:125H:30 / 1kg 附件 Measuring jointSJ10/50 Measuring jointSJ10
DI-IM-IP500日本思達電批扭力測試儀
| Management of air tool / oil pulse tool |
| 仠Torque Tester 丂DI-1M-IP丂series |
|
| Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range (at the time of Track) | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯(499 or less digit亇3digit) | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity (baud rate 9600) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
| Accessories (one piece each) | Attache case | 乗 | 乗 | |
| AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | 俬俹俆侽 | 俬俹俀侽侽 | 俬俹俆侽侽 | |
| 俙 | 兂50 | 兂60 | 兂80 | |
| 俛 | 63 | 73 | 99 | |
| 俠 | 10 | 10 | 15.5 | |
| 俢 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| Weight | 632g | 1.8kg | 3kg | |
DI-IM-IP200日本思達電批扭力測試儀
| Management of air tool / oil pulse tool |
| 仠Torque Tester 丂DI-1M-IP丂series |
|
| Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range (at the time of Track) | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯(499 or less digit亇3digit) | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity (baud rate 9600) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
| Accessories (one piece each) | Attache case | 乗 | 乗 | |
| AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | 俬俹俆侽 | 俬俹俀侽侽 | 俬俹俆侽侽 | |
| 俙 | 兂50 | 兂60 | 兂80 | |
| 俛 | 63 | 73 | 99 | |
| 俠 | 10 | 10 | 15.5 | |
| 俢 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| Weight | 632g | 1.8kg | 3kg | |
最新產品
- 冀中能源用實力說話氣水分離器好用到驚掉下巴 2025/7/12 9:07:09
- 大容量恒溫解凍設備 2025/7/12 9:01:27
- 均勻加熱解凍系統 2025/7/12 9:00:56
- 數碼控溫融漿機 2025/7/12 8:59:14
- WGH-II型干式解凍機 2025/7/12 8:58:54
- 實驗室恒溫解凍儀器 2025/7/12 8:58:36
- 生物樣本智能解凍機 2025/7/12 8:58:06
- 發動機試驗臺 動載測試裝配底板 規格齊全 2025/7/12 8:49:36
- 上海外墻空鼓開裂脫落病變修繕 蜘蛛人吊繩高空維修外墻 2025/7/12 8:48:47
- 醫療級血漿解凍箱 2025/7/12 8:48:35
- 干式數碼恒溫解凍設備 2025/7/12 8:48:16
- 數碼恒溫循環解凍箱 2025/7/12 8:47:50
- WGH-II型數碼恒溫解凍箱 2025/7/12 8:47:29
- 太倉柴油配送，太倉工廠柴油，太倉鍋爐柴油批發 2025/7/12 6:06:48
- KUHNKE氣動定時器PT31I 2025/7/11 23:04:52
- INGUN插座KS 113 30 2025/7/11 22:53:21
- GERWAH聯軸器AKN150-38H7-32H7 2025/7/11 22:39:34
- FLOJET泵N5100040 2025/7/11 22:23:19
- ELBARON濾芯RON/AZ228 2025/7/11 22:04:09
- DAMCOS指示器DPI 160B4171 2025/7/11 21:58:40
- ACKSYS天線WL-ANT-2458/2-ORPS 2025/7/11 21:53:34
- ACKSYS電源線WLg-M12U-PWR-5M 2025/7/11 21:49:02
- 德國TWK CRD58系列4096R4096C2Z01編碼器-2 2025/7/11 19:52:47
- 德國TWK CRD58系列4096R4096C2Z01編碼器 2025/7/11 19:52:40
- Rexnord 傳動軸用零件 軸套 ES 4 希而科 2025/7/11 19:46:18
- Knipex 工具 鉗子 五金工具 44 31 J42 2025/7/11 19:43:49
- finder 溫度傳感器 7T 系列 希而科 2025/7/11 19:41:55
- Lorenz 傳感器 K-K2573 系列 希而科 2025/7/11 19:40:09
- Minebea PR 6246 S型拉式傳感器 希而科 2025/7/11 19:38:19
- BD sensors 變送器 DMP 331P系列 希而科 2025/7/11 19:36:10