日韩国产欧美一级天堂，91Av无码免费看，高潮久久久久久AV冒白桨，H视频无遮挡免费网站，97国产大学生情侣在线视频，亚洲一区二区精品无码色欲，久久精品少妇视频，国产成人综合久久精品推最新

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool

●Torque Tester 　DI-1M-IP　series

Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		ＤＩ-１Ｍ-ＩＰ５０	ＤＩ-１Ｍ-ＩＰ２００	ＤＩ-１Ｍ-ＩＰ５００
Measuring range （at the time of Track）		0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Peak down Operating range		0.70N?m～, 7.0kgf?cm/ lbf?in～	7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy		±0.5％（F/S）（499 or less digit±3digit）
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down point ａnd hold.
Display zero clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity （baud rate 9600）
Power supply		Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part　Weight		About 600g
Detection part　Weight		about 600g	about 1kg	about 2.5kg
Meter part　Outside size		146（W）×115（D）×48（H）（It does not contain by the projection part）
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		Attache case	―	―
		AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	ＩＰ５０	ＩＰ２００	ＩＰ５００
Ａ	Φ50	Φ60	Φ80
Ｂ	63	73	99
Ｃ	10	10	15.5
Ｄ	Φ90	Φ110	Φ140
Ｅ	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	9.5ｓｑ	12.7ｓｑ	19ｓｑ
Weight	632g	1.8kg	3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ

DIS-IP200日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ

DIS-IP50日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ

DIS-IP5日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ

DIS-IP05日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ

DI-1M-IP200日本CEDAR扭力測試儀

Management of air tool / oil pulse tool

●Torque Tester 　DI-1M-IP　series

Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		ＤＩ-１Ｍ-ＩＰ５０	ＤＩ-１Ｍ-ＩＰ２００	ＤＩ-１Ｍ-ＩＰ５００
Measuring range （at the time of Track）		0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Peak down Operating range		0.70N?m～, 7.0kgf?cm/ lbf?in～	7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy		±0.5％（F/S）（499 or less digit±3digit）
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down point ａnd hold.
Display zero clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity （baud rate 9600）
Power supply		Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part　Weight		About 600g
Detection part　Weight		about 600g	about 1kg	about 2.5kg
Meter part　Outside size		146（W）×115（D）×48（H）（It does not contain by the projection part）
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		Attache case	―	―
		AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	ＩＰ５０	ＩＰ２００	ＩＰ５００
Ａ	Φ50	Φ60	Φ80
Ｂ	63	73	99
Ｃ	10	10	15.5
Ｄ	Φ90	Φ110	Φ140
Ｅ	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	9.5ｓｑ	12.7ｓｑ	19ｓｑ
Weight	632g	1.8kg	3kg

DI-1M-IP50日本CEDAR扭力測試儀

Management of air tool / oil pulse tool

●Torque Tester 　DI-1M-IP　series

Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		ＤＩ-１Ｍ-ＩＰ５０	ＤＩ-１Ｍ-ＩＰ２００	ＤＩ-１Ｍ-ＩＰ５００
Measuring range （at the time of Track）		0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Peak down Operating range		0.70N?m～, 7.0kgf?cm/ lbf?in～	7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy		±0.5％（F/S）（499 or less digit±3digit）
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down point ａnd hold.
Display zero clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity （baud rate 9600）
Power supply		Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part　Weight		About 600g
Detection part　Weight		about 600g	about 1kg	about 2.5kg
Meter part　Outside size		146（W）×115（D）×48（H）（It does not contain by the projection part）
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		Attache case	―	―
		AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	ＩＰ５０	ＩＰ２００	ＩＰ５００
Ａ	Φ50	Φ60	Φ80
Ｂ	63	73	99
Ｃ	10	10	15.5
Ｄ	Φ90	Φ110	Φ140
Ｅ	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	9.5ｓｑ	12.7ｓｑ	19ｓｑ
Weight	632g	1.8kg	3kg

DI-1M-IP500日本CEDAR扭力測試儀

Management of air tool / oil pulse tool

●Torque Tester 　DI-1M-IP　series

Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		ＤＩ-１Ｍ-ＩＰ５０	ＤＩ-１Ｍ-ＩＰ２００	ＤＩ-１Ｍ-ＩＰ５００
Measuring range （at the time of Track）		0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Peak down Operating range		0.70N?m～, 7.0kgf?cm/ lbf?in～	7.0N?m～, 70kgf?cm/ lbf?in～
Accuracy		±0.5％（F/S）（499 or less digit±3digit）
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down point ａnd hold.
Display zero clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity （baud rate 9600）
Power supply		Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part　Weight		About 600g
Detection part　Weight		about 600g	about 1kg	about 2.5kg
Meter part　Outside size		146（W）×115（D）×48（H）（It does not contain by the projection part）
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		Attache case	―	―
		AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.）
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	ＩＰ５０	ＩＰ２００	ＩＰ５００
Ａ	Φ50	Φ60	Φ80
Ｂ	63	73	99
Ｃ	10	10	15.5
Ｄ	Φ90	Φ110	Φ140
Ｅ	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	9.5ｓｑ	12.7ｓｑ	19ｓｑ
Weight	632g	1.8kg	3kg

DIS-IP500日本CEDAR扭力測試儀

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. 　（A Measurement mode ａnd a unit. Other coded data is　displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision　 □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）.　 □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. 　　It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ