DIW-20CEDAR思達數(shù)顯扭力扳手
| Screw tightening control |
| 仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
 |
| （1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple |
| ＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included. |
NEW丂DEVELOPMENT Wrench head awivels 300亱  |
| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
| Measuring range N丒m （at the time of Track） | 0.20 - 15 N | 0.20 - 20 N | 0.20 - 75 N丒m | 2.0 - 120 N丒m | |
| 2.0乣150 kgf丒cm | 2.0乣200 kgf丒cm | 2.0乣750 kgf丒cm | 20乣1200 kgf丒cm | ||
| 2.0乣130 lbf丒in | 2.0乣180 lbf丒in | 2.0乣650 lbf丒in | 20乣1040 lbf丒in | ||
| Accuracy | 亇0.5% （F/S） （199 or less digit亇1digit） | 亇0.5% （F/S） （499 or less digit亇3digit） | 亇0.5% （F/S） （199 or less digit亇1digit乯 | ||
| Display | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW （rightleft） | ||||
| Measuring mode | P-P Peak | Holding Peak Load Value | |||
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） | ||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
| C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | |||
| Data memory | 800 data / ten channels data | ||||
| A setup of the number of counts | One to 99 count （count in a direction with a bundle） | ||||
| Auto power save | 10 minutes no use, automatically switch off. | ||||
| Charging time | From empty - less than 5hours | ||||
| Continunous working time | 12 hours | ||||
| Outside size | 冇34（grip）亊236（L） | 冇34（grip）亊235（L） | 冇34（grip）亊320（L） | 冇34（grip）亊445（L） | |
| Weight （about） | 430g | 470g | 620g | 830g | |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
| Attachment | - | One-way socket | |||
| Accessories （one piece each） | AC/DC adaptor | ||||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
DIW-75CEDAR思達數(shù)顯扭力扳手
| Screw tightening control |
| 仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
|
| （1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple |
| ＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included. |
| NEW丂DEVELOPMENT Wrench head awivels 300亱 |
| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
| Measuring range N丒m （at the time of Track） | 0.20 - 15 N | 0.20 - 20 N | 0.20 - 75 N丒m | 2.0 - 120 N丒m | |
| 2.0乣150 kgf丒cm | 2.0乣200 kgf丒cm | 2.0乣750 kgf丒cm | 20乣1200 kgf丒cm | ||
| 2.0乣130 lbf丒in | 2.0乣180 lbf丒in | 2.0乣650 lbf丒in | 20乣1040 lbf丒in | ||
| Accuracy | 亇0.5% （F/S） （199 or less digit亇1digit） | 亇0.5% （F/S） （499 or less digit亇3digit） | 亇0.5% （F/S） （199 or less digit亇1digit乯 | ||
| Display | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW （rightleft） | ||||
| Measuring mode | P-P Peak | Holding Peak Load Value | |||
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） | ||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
| C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | |||
| Data memory | 800 data / ten channels data | ||||
| A setup of the number of counts | One to 99 count （count in a direction with a bundle） | ||||
| Auto power save | 10 minutes no use, automatically switch off. | ||||
| Charging time | From empty - less than 5hours | ||||
| Continunous working time | 12 hours | ||||
| Outside size | 冇34（grip）亊236（L） | 冇34（grip）亊235（L） | 冇34（grip）亊320（L） | 冇34（grip）亊445（L） | |
| Weight （about） | 430g | 470g | 620g | 830g | |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
| Attachment | - | One-way socket | |||
| Accessories （one piece each） | AC/DC adaptor | ||||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
DIW-120CEDAR思達數(shù)顯扭力扳手
| Screw tightening control |
| 仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15 |
|
| （1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple |
| ＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included. |
| NEW丂DEVELOPMENT Wrench head awivels 300亱 |
| Specification | DIW-15 | DIW-20 | DIW-75 | DIW-120 | |
| Measuring range N丒m （at the time of Track） | 0.20 - 15 N | 0.20 - 20 N | 0.20 - 75 N丒m | 2.0 - 120 N丒m | |
| 2.0乣150 kgf丒cm | 2.0乣200 kgf丒cm | 2.0乣750 kgf丒cm | 20乣1200 kgf丒cm | ||
| 2.0乣130 lbf丒in | 2.0乣180 lbf丒in | 2.0乣650 lbf丒in | 20乣1040 lbf丒in | ||
| Accuracy | 亇0.5% （F/S） （199 or less digit亇1digit） | 亇0.5% （F/S） （499 or less digit亇3digit） | 亇0.5% （F/S） （199 or less digit亇1digit乯 | ||
| Display | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW （rightleft） | ||||
| Measuring mode | P-P Peak | Holding Peak Load Value | |||
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） | ||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||||
| C Real-time output | Load torque value is outputted every about1/ 160 second | ||||
| Decision function | Setting of torque value | Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | |||
| Data memory | 800 data / ten channels data | ||||
| A setup of the number of counts | One to 99 count （count in a direction with a bundle） | ||||
| Auto power save | 10 minutes no use, automatically switch off. | ||||
| Charging time | From empty - less than 5hours | ||||
| Continunous working time | 12 hours | ||||
| Outside size | 冇34（grip）亊236（L） | 冇34（grip）亊235（L） | 冇34（grip）亊320（L） | 冇34（grip）亊445（L） | |
| Weight （about） | 430g | 470g | 620g | 830g | |
| Socket engagement | 6.35 square, including steel ball | 9.5 square, including steel ball | 12.7 square, including steel ball | ||
| Attachment | - | One-way socket | |||
| Accessories （one piece each） | AC/DC adaptor | ||||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
最新產品
- Cefdinir (Standard) 2025/8/2 0:10:20
- Prilocaine (Standard) 2025/8/2 0:10:18
- Ketorolac tromethamine salt (Standard) 2025/8/2 0:10:16
- Flucytosine (Standard) 2025/8/2 0:10:15
- Aminophylline (Standard) 2025/8/2 0:10:13
- Alpha-Estradiol (Standard) 2025/8/2 0:10:11
- rel-Estradiol-13C6 2025/8/2 0:10:09
- Pitavastatin Calcium (Standard) 2025/8/2 0:10:08
- Pefloxacin mesylate (Standard) 2025/8/2 0:10:06
- Tranexamic acid (Standard) 2025/8/2 0:10:03
- Tranexamic acid-13C2,15N 2025/8/2 0:10:01
- Adenine (hydrochloride) (Standard) 2025/8/2 0:09:59
- Adenine-13C5,15N5 2025/8/2 0:09:57
- Ticlopidine hydrochloride (Standard) 2025/8/2 0:09:55
- Fluticasone (propionate) (Standard) 2025/8/2 0:09:53
- Ketotifen fumarate (Standard) 2025/8/2 0:09:50
- Balofloxacin (Standard) 2025/8/2 0:09:49
- Lafutidine (Standard) 2025/8/2 0:09:47
- Duloxetine hydrochloride (Standard) 2025/8/2 0:09:45
- (R)-Duloxetine 2025/8/2 0:09:43
- (±)-Duloxetine 2025/8/2 0:09:41
- Ivabradine hydrochloride (Standard) 2025/8/2 0:09:40
- Detomidine hydrochloride (Standard) 2025/8/2 0:09:38
- Mizolastine (Standard) 2025/8/2 0:09:36
- L-Ascorbic acid sodium salt (Standard) 2025/8/2 0:09:34
- Sodium Salicylate (Standard) 2025/8/2 0:09:30
- Milnacipran hydrochloride (Standard) 2025/8/2 0:09:27
- Antipyrine (Standard) 2025/8/2 0:09:25
- Olsalazine (Standard) 2025/8/2 0:09:22
- Olsalazine Disodium (Standard) 2025/8/2 0:09:21